Table of Contents
Advertisement
6.4 Bridge Mode Status Screen
Click Settings > System > Status to open the status screen.
Figure 19 Settings > System > Status (Bridge Mode)
The following table describes the labels shown in the Status screen.
Table 6 Settings > System > Status (Bridge Mode)
LABEL
System
Model Name
Firmware Version
System Operation Mode
Enable IPv4 Firewall
Enable IPv6 Simple Security
System Uptime
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP Server
IPv6 Address
Chapter 6 Bridge Mode
DESCRIPTION
This is the model name of your device.
This is the firmware version.
This is the device mode to which the NBG7815 is set, see
for more information.
This shows if the IPv4 firewall is enabled on the NBG7815.
This shows if the IPv6 firewall is enabled on the NBG7815.
This is the total time the NBG7815 has been on.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Enable or Disable.
This shows the current IPv6 address of the NBG7815 in the LAN.
NBG7815 User's Guide
42
Section 13.7 on page 140
Advertisement
Table of Contents
