Table of Contents
Advertisement
If necessary, you can remove the condensate
7.
trough for cleaning.
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
‒
it.
8.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use glass scrapers, sharp or abrasive
▶
cleaning aids, or harsh cleaning products.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
Clean the condensate trough with a cloth and hot
9.
soapy water.
Clean the appliance door.
10.
→ "Suitable cleaning agents", Page 12
Dry the door panes and refit them.
11.
→ "Fitting the door panes", Page 17
14.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
Place the condensate trough vertically in the re-
2.
tainer
and turn it downwards.
Slide the inner pane into the left- and right-hand
3.
retainers .
Push the inner pane upwards until it is in the left-
4.
and right-hand retainers .
Put the door cover in position
5.
it until you hear it click into place.
Open the appliance door fully.
6.
Close the locking levers on the left- and right-hand
7.
hinges .
a The locking levers are closed. The appliance door is
secured and cannot be detached.
Close the appliance door.
8.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
Appliance door en
and push down on
17
Advertisement
Table of Contents
