Cleaning Aid Humidclean; Shelf Supports - Siemens HB532AB.0 User Manual And Installation Instructions

Table of Contents

Advertisement

en Cleaning aid humidClean
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
Use the function selector to set 3D hot air.
5.
Use the temperature selector to set the maximum
6.
temperature.
a The appliance starts heating after a few seconds.
Switch off the appliance after one hour.
7.
12 

Cleaning aid humidClean

The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
12.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
when the cooking compartment is hot.
Requirement: The cooking compartment has cooled
down completely.
Remove the accessories from the cooking compart-
1.
ment.
Mix 0.4 litres water with a drop of washing-up liquid
2.
and pour into the middle of the cooking compart-
ment floor.
Do not use distilled water.
Use the function selector to set the Bottom heat-
3.
type of heating.
ing 
Use the temperature selector to set 80 °C.
4.
Press the
button repeatedly until
5.
lighted in the display.
Use the
or
 button to set the time to
6.
four minutes.
a After a few seconds, the appliance starts heating
and the time counts down.
13 

Shelf supports

To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
13.1 Detaching the shelf supports
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
14
is high-
and detach it
⁠ .
Once the appliance has cooled down, wipe the
8.
cooking compartment with a damp cloth.
Note: Reddish marks may appear on the self-clean-
ing surfaces. This is residue from food. These spots
are not harmful and are not rust. These marks do
not impair the cleaning ability of the self-cleaning
surfaces.
Attach the shelf supports.
9.
a Once the time has elapsed, an audible signal
sounds and the display shows the time as zero.
Switch off the appliance and leave the cooking com-
7.
partment to cool down for 20 minutes.
12.2 Recleaning the cooking compartment
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning aid, wipe the cooking com-
partment clean and allow it to dry fully.
Requirement: The cooking compartment has cooled
down.
Open the appliance door and remove the remaining
1.
water with an absorbent sponge cloth.
Clean the smooth surfaces in the cooking compart-
2.
ment with a dish cloth or a soft brush. Remove stub-
born food remnants using a stainless steel scouring
pad.
Remove limescale with a cloth soaked in vinegar.
3.
Then wipe with clean water and rub dry with a soft
cloth (including under the door seal).
Once the cooking compartment is cleaned suffi-
4.
ciently:
To allow the cooking compartment to dry, open
the appliance door to the stop position (approx.
30°) and leave it open for approx. one hour.
To dry the cooking compartment quickly, heat up
the appliance for approx. five minutes at 3D hot
and 50 °C while the door is open.
air 
Pull the whole rail to the front
2.
Clean the rail.
3.
→ "Cleaning products", Page 12
and remove it.

Advertisement

Table of Contents
loading

Table of Contents