Master Spas SEATTLE Owner's Manual & Limited Warranty page 62

SPA CONTROLS - ICON SPA TOUCH
THE SETTINGS SCREEN
PROGRAMMING, ETC.
The Settings Icon
behaviors are controlled.
Settings
Heat
Lock
HEAT MENU
The Heat Icon in the Settings Screen takes you to a screen where you can control the Heat
Mode and the Temperature Range.
Heat Mode
Heat Mode
Temp Range
TEMPERATURE RANGES (HIGH VS. LOW)
This system incorporates two temperature range settings with independent set temperatures. The
specific range can be selected on the Settings Screen and is visible on the Main Screen in the upper
left corner of the display.
These ranges can be used for various reasons, with a common use being a "ready to use" setting
vs. a "vacation" setting. Each range maintains its own set temperature as programmed by the user.
This way, when a range is chosen, the spa will heat to the set temperature associated with that
range. Check the set water temperature and consider lowering it for the times when the spa will
typically not be in use.
High Range can be set between 80˚F (27˚C) and 104˚F (40˚C). Low Range can be set between 50˚F
(10˚C) and 99˚F (37˚C). Freeze Protection is active in either range. Consider that the comfortable
temperature range during use may be lower than the maximum safe temperature.
DO NOT DIVE. DO NOT DIVE.
takes you to the Settings Screen, where all programming and other spa
Time Reminders
Filter Hold
Ready
High
Each icon on the Settings screen takes you to
a different screen, where one or more settings
may be viewed and/or edited.
110 60