Master Spas SEATTLE Owner's Manual & Limited Warranty page 76

SPA CONTROLS - ICON SPA TOUCH
UTILITIES – GFCI TEST FEATURE
The Ground Fault Circuit Interrupter (GFCI) or Residual Current Detector (RCD) is an important
safety device and is required equipment on a spa installation.
GFCI Test
GFCI Status - Armed
Test Reset
FORCING THE GFCI TRIP TEST (North America Only)
Touching the GFCI Test Icon on the Utilities Screen takes you to the GFCI Test screen. This feature
is not available on all systems. The GFCI Test icon will only display if the system is capable of this
feature. Some UL registered systems do not have the GFCI Test Feature.
The installer can use the GFCI Trip Test to confirm proper function of the GFCI.
The GFCI should trip within several seconds and the spa should shut down. If it does not, shut
down the power and manually verify that a GFCI breaker is installed and that the circuit and spa are
wired correctly. Verify the function of the GFCI with its own test button. Restore power to the spa
and repeat the GFCI Trip Test.
Once the GFCI is tripped by the test (causing the spa to be shut off from power being removed),
reset the GFCI breaker to turn spa back on. You can verify a successful test by navigating to the
above screen. "Passed" should appear after the Reset line is selected on the GFCI screen.
CE PRODUCT
CE registered systems do not have an RCD Test Feature due to the nature of the electrical service.
The end-user must be trained how to properly test and reset the RCD.
DO NOT DIVE. DO NOT DIVE. 124 74