Model Specifications - Master Spas SEATTLE Owner's Manual & Limited Warranty

MODEL SPECIFICATIONS

See Electrical Requirements section for further details.
1
Total bather capacity in spa. The number of bathers in spa should never exceed indicated seating capacity. Depending on
2
spa size, water level and bather displacement; full seating capacity may not be achievable. Do not allow additional bath-
ers to enter if bather displacement results in water levels overflowing or reaching the spa controls (air controls, diverters,
spa topside control and etc.) as this will result in water leaking out of the spa shell and potentially in to the equipment
area.
Full weight based on dry weight of spa, max seating capacity of spa, assumed average weight per person of 185 pounds
3
and estimated water weight of 8.34 pounds per gallon. Rounded up in increments of 5.
Manufacturing tolerances along with other factors can result in variance in actual spa weight. If weight is a critical figure
4
necessary for delivery, or final installation, we suggest a minimum of 15% be added to the listed weight when planning
delivery or installation.
* Default Minimum Electrical Requirement as Configured from Manufacturing. See Electrical Requirements Section for
Electrical Hook-Up by Control System.
DO NOT DIVE. 40