Master Spas SEATTLE Owner's Manual & Limited Warranty page 81

SPA CONTROLS - ICON SPA TOUCH
REMINDER MESSAGES
REMINDER MESSAGES OF ROUTINE MAINTENANCE
Reminder Messages can be turned off by using the Reminders Screen.
Reminders are preprogrammed routine maintenance reminders that appear on the Main Screen as
at different intervals and will help guide you in taking care of your spa. Some messages may not
apply depending on the actual equipment in the spa.
CHECK THE PH
May appear on a regular schedule, i.e. every 7 days. Check pH with a test kit and adjust pH with the
appropriate chemicals.
CHECK THE SANITIZER
May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistry
with a test kit and adjust with the appropriate chemicals.
CLEAN THE FILTER
May appear on a regular schedule, i.e. every 30 days.
TEST THE GFCI (OR RCD)
May appear on a regular schedule, i.e. every 30 days.
The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its
reliability.
Every user should be trained to safely test and reset the GFCI or RCD associated with the hot tub
installation.
A GFCI or RCD will have a TEST button on it that allows a user to verify proper function.
CHANGE THE WATER
May appear on a regular schedule, i.e. every 180 days. Change the water in the spa on regular basis
to maintain proper chemical balance and sanitary conditions.
Error
Additional messages may appear on specific systems.
Message Code: 30
Reminder messages are simply cleared and automatically reset to appear at the next
The heater is too hot
preprogrammed interval by clicking the Clear Icon.
Clear
DO NOT DIVE. DO NOT DIVE. 129 79