Master Spas SEATTLE Owner's Manual & Limited Warranty page 54

SPA CONTROLS - ICON SPA TOUCH
THE MAIN SCREEN
ICON SPECIFICATIONS
= High Temperature Range
1.
2. = Ready Mode
= Filter1 Mode
3.
= Ozone is Running. If you don't see the icon that means the Ozone is OFF.
4.
5. = Cleanup Cycle is Running. If you don't see the icon that means the Cleanup Cycle is OFF.
= Wi-Fi Icon just indicates that the optional Wi-Fi module is connected to the spa system. It
6.
does not indicate signal strength.
7. Lock Icon: When displayed, indicates the panel is in a locked mode.
There are 2 lock icons that can be shown on the title bar of most screens. A lock icon with an
'S' means that a settings lock has been applied. It is shown on screens that are affected
by the settings lock. And a lock icon with a 'P'
settings and panel are locked, only the panel lock will show since it overrules just settings
being restricted. When the panel is locked, the Settings Menu Screen will only show items not
affected by that lock (System Info and Lock Screens).
To unlock or lock a setting or panel lock, you press the corresponding icon that is locked and
then press and hold the word "Lock" in the title bar for 5+ seconds until the text and icon
change to the opposite state.
= Invert (or flip) Screen
8.
= Set Temperature Up: Adjust set temperature higher.
9.
10. Current water temperature: Displays current water temperature.
11. Temperature Scale: Indicates if the temperature is in
= Set Temperature Down. Adjust set temperature lower.
12.
13. Message Waiting Indicator. The Message Waiting Indicator will show one of the following icons:
= Critical Error (Spa can't function until it's fixed)
= Normal Error or Warning
= Reminder Message
= Information Message
Touch the Indicator to go to a Message Screen which shows the message.
Some messages will include the "Call for Service" text as it requires a service technician to
fix the problem. If the panel is locked and a message alert appears, you will be taken to the
UNLOCK screen before you can clear the message.
Touching the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the
System Information Screen to allow for troubleshooting over the phone or for a field service
tech to better understand what is going on. Exiting the System information Screen will take
you back to the Message Screen in that situation.
= Heat Indicator. Indicates the heating process and when the spa heater is on.
14.
DO NOT DIVE. DO NOT DIVE.
= Low Temperature Range
= Ready And Rest Mode
= Filter2 Mode = Filter1 and 2 Mode
= Rest Mode
means the Panel has been locked. If both
= Fahrenheit or
102 52
C
= Celsius.