Master Spas SEATTLE Owner's Manual & Limited Warranty page 79

SPA CONTROLS - ICON SPA TOUCH
SENSOR-RELATED MESSAGES
SENSORS ARE OUT OF SYNC – M015**
The temperature sensors MAY be out of sync by 3°F (1°C). Contact your Master Spas dealer or
service organization if this message does not disappear within a few minutes.
SENSORS ARE OUT OF SYNC – CALL FOR SERVICE* – M026**
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour.
Contact your Master Spas dealer or service organization.
Message Code: 31
Sensor A fault
Call for service
MISCELLANEOUS MESSAGES
COMMUNICATIONS ERROR
The control panel is not receiving communication from the System. Contact your Master Spas dealer
or service organization.
TEST SOFTWARE INSTALLED
The Control System is operating with test software. Contact your Master Spas dealer or service
organization.
Message Code: 30
* Some messages can be reset from the panel. Messages that can be reset will appear with a Clear
The heater is too hot
Icon at the bottom of the Message Screen. Press the Clear Icon to reset the system.
**M0XX is a Message Code. Codes like this will be seen in the Messages Log.
DO NOT DIVE. DO NOT DIVE.
Error
Exit
Error
Clear
SENSOR A FAULT, SENOR B FAULT –
SENSOR A: M031**, SENSOR B: M032**
A temperature sensor or sensor circuit has
failed. Contact your Master Spas dealer or
service organization.
127 77