Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
Auto time adjustment is performed at
●
the times described below.
After your phone's time zone or
ー
summer time setting is changed
After 24 hours or more have passed
ー
since the last time adjustment using
Bluetooth connection
After 24 hours or more have passed
ー
since city swapping using G-
SHOCK Connected or watch
operation
After 24 hours or more have passed
ー
since the last home city change or
time adjustment using watch
operation
Watch operation can be performed
●
even while it is connected with your
phone.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Enter the Calendar Mode.
Navigating Between Modes
l
3. X
Hold down (D) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch's time setting
will be adjusted.
Operation Guide 5623
Viewing Diving Log Data
You can use G-SHOCK Connected to view
Diving Log data.
The items below can be viewed.
●
Dive start date and time
ー
Dive time
ー
Surface interval
ー
Location information
ー
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "G-SHOCK Connected" icon.
2. Y
Perform the operation shown on the
phone screen to view Diving Log data.
Specifying a Port
After you use G-SHOCK Connected to specify
a port, you can use the watch to view the
current time and tide level at the port.
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
Note
You can use G-SHOCK Connected to
●
specify any one of 3,300 points around
the world as the port.
1. Y
Tap the "G-SHOCK Connected" icon.
2. Y
Perform the operation shown on the
phone screen to specify a port.
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Enter the Calendar Mode and then press
●
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
Note
G-SHOCK Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1. Y
Tap the "G-SHOCK Connected" icon.
2. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour and minute
World Time hour (24-hour)
12