Before Getting Started; Watch Face Items; Navigating Between Modes - Casio 5623 Operation Manual

Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Important!
This watch is not a special-purpose
●
measuring instrument. Measurement
function readings are intended for
general reference only.
It can be used while skin diving, scuba
●
diving, etc.
Using the Diving Function
l
Note
The illustrations included in this
●
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.

Watch Face Items

①
②
③
⑧
⑨
⑩
Day of week
A
In the Calendar Mode, the mode hand
points to the day of the week in the Home
City.
Summer time setting
B
The mode hand points to the current
summer time setting.
[D]
C
In the Dive Mode, the mode hand points
to [D].
Operation Guide 5623
Tide Level
D
In the Tide Graph Mode, the mode hand
points to the current tide level in the
specified port.
[ST]
E
In the Stopwatch Mode, the mode hand
points to [ST].
[TR]
F
In the Timer Mode, the mode hand points
to [TR].
[AL]
G
In the Alarm Mode, the mode hand points
to [AL].
Alarm on/off setting
H
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
Last receive result, phone connection
I
status, Airplane Mode setting
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a time calibration signal when
the watch is not paired with a phone.
[Y(YES)]: Auto time adjustment
successful
④
[N(NO)]: Auto time adjustment failed
The second hand indicates the
⑤
connection status between the watch and
⑥
a phone when the watch is paired with a
⑦
phone.
[Y(YES)]: The watch is connected to your
phone.
[N(NO)]: The watch is not connected to
your phone.
The second hand indicates if auto time
adjustment (Airplane Mode) is enabled or
⑪
disabled.
[Y(YES)]: Auto time adjustment enabled
(Airplane Mode disabled)
[N(NO)]: Auto time adjustment disabled
(Airplane Model enabled)
[C]
J
When connection with the phone starts,
the second hand will point to [C].
[RC]
K
The second hand points to [RC] while time
calibration signal reception is in progress.

Navigating Between Modes

Press (C) to cycle between modes.
In any mode*, hold down (C) for at least one
●
second to enter the Calendar Mode.
In any mode*, hold down (C) for at least two
●
seconds to enter the Dive Mode.
* Besides Dive Mode.
Dive Mode
C C
(At least 2 seconds) (At least 2 seconds)
Calendar Mode
C
Mode hand
Alarm Mode Tide Graph Mode
C
Timer Mode Stopwatch Mode
C
Connecting with a Phone
●
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Before connection After connection
D
C
C
2