Advertisement
INSTALLATION
To Insert Micro SD Card
After card is inserted into the card slot successfully, an SD card
icon will appear on the monitor screen; otherwise, the 'no SD
card' icon will show.
NOTE: If the device fails to read the card due to late insertion
or some problem of the card, the screen displays "FORMAT SD
CARD". If the card is in normal condition, press OK; otherwise,
press YES to format the card.
Install the Accessories
The three (3) included accessories (mirror, hook and magnet) are
all attached to the tube in the same way as illustrated below:
Place hook into hole at end of tube. Place rubber ring around
camera head and hook.
6
Advertisement
