Sliding Doors, Assembly - Beverage-Air BB Series Installation And Operating Instructions Manual

User Manual for BB Refrigerators

SLIDING DOORS, ASSEMBLY

Rev. 06/20
Leveling
1. To insure proper operation, the cabinet must be
2. Level the cabinet, see page
3. Verify the level condition by putting a level on the
Door Removal and Installation
1. Each door can be removed for cleaning and
Figure 3b
2. To remove a door, lift it up off the track and pull the
3. Once the bottom of the door has cleared the track, pull
4. To install a door, simultainously lift and rotate the
5. While lifting, insert the upper corner of the door into
6. Push the self closing device with the door until the
7. Check for proper operation.
Beverage-Air
level.
header (figure 2a) and side frame (figure 2b) of
the door assembly.
maintenance.
bottom of the door away from the cabinet. Upwards
pressure must be maintained (figure 3a) while pulling
the door bottom.
the door slowly away from the self closing device as it
retracts and awy from the cabinet (figure 3b).
door.
the upper door track so that the torpedo is placed
against that corner of the door (figure 3c).
door becomes horizontal, then pivot the door down
onto the lower frame track (figure 3d) and allow the
door to rest on the sil track.
Beverage-Air
11