Sliding Glass Doors - Beverage-Air MMR Series Installation And Operating Instructions Manual

User Manual for MMR Refrigerators

SLIDING GLASS DOORS

Adjusting Spring Tension on ClearCool®3000 & ClearCool®3100
The amount of tension used on the self-closing bottle slider doors can be decreased or increased by relocating the spring
retaining grommet and self-drilling screw.
1. Hold door in open position to expose spring, grommet and screw in the header. Open only as far as required to keep
the amount of tension to a minimum.
2. Look into Header and note the 3 square cut outs.
1. Inner location is for minimum tension.
2. Mid location is for mid-range tension.
3. Outside location is for maximum tension.
10
1
Beverage-Air
Beverage-Air
Rev. 07/20