Champion Power Equipment 100519 Operator's Manual
  1. Manuals
  2. Brands
  3. Champion Power Equipment Manuals
  4. Portable Generator
  5. 100519
  6. Operator's manual

Champion Power Equipment 100519 Operator's Manual

Portable inverter generator
Hide thumbs
Table of Contents

Advertisement

Quick Links

SAvE THESE INSTRUCTIONS. This manual contains important safety precautions which should be read and understood before operating the product. Failure
to do so could result in serious injury. This manual should remain with the product.
Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice.
REV 20210803
REGISTER YOUR PRODUCT ONLINE
at championpowerequipment.com
OPERATOR'S MANUAL
6250W OPEN FRAME INvERTER
or visit championpowerequipment.com
Champion Power Equipment, Inc., Santa Fe Springs, CA USA
MODEL #100519

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 100519 and is the answer not in the manual?

Questions and answers

Related Manuals for Champion Power Equipment 100519

Summary of Contents for Champion Power Equipment 100519

  • Page 1 This manual should remain with the product. Specifications, descriptions and illustrations in this manual are as accurate as known at the time of publication, but are subject to change without notice. REV 20210803 Champion Power Equipment, Inc., Santa Fe Springs, CA USA...

  • Page 2: Table Of Contents

    TAbLE OF CONTENTS 100519 - 6250W OPEN FRAME INvERTER TAbLE OF CONTENTS Maintenance ..........

  • Page 3: Introduction

    INTRODUCTION 100519 - 6250W OPEN FRAME INvERTER INTRODUCTION SAFETY DEFINITIONS Congratulations on your purchase of a Champion Power The purpose of safety symbols is to attract your attention to Equipment (CPE) product. CPE designs, builds, and supports possible dangers. The safety symbols, and their explanations, all of our products to strict specifications and guidelines.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 100519 - 6250W OPEN FRAME INvERTER IMPORTANT SAFETY INSTRUCTIONS DANGER  Operate equipment with guards in place. WARNING  Rotating parts can entangle hands, feet, hair, clothing and/ Cancer and Reproductive Harm – www.P65Warnings.ca.gov or accessories. Traumatic amputation or severe laceration can result.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS 100519 - 6250W OPEN FRAME INvERTER WARNING CAUTION   Spark from removed spark plug wire can result in fire or Start the generator and allow the engine to stabilize before electrical shock. connecting electrical loads. Connect electrical equipment in the off position, and then When servicing the generator: turn them on for operation.

  • Page 6: Fuel Safety

    IMPORTANT SAFETY INSTRUCTIONS 100519 - 6250W OPEN FRAME INvERTER Fuel Safety When operating the generator: DO NOT move or tip the generator during operation. DANGER  DO NOT tip the generator or allow fuel or oil to spill. GASOLINE AND GASOLINE VAPORS ARE HIGHLY When transporting or servicing the generator: FLAMMABLE AND EXPLOSIVE.

  • Page 7: Safety Labels

    Fuel UNLEADED FUEL ONLY. Minimum octane This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for rating of 87. Maximum 10% ethanol. outside parties without the explicit consent of Champion Power Equipment.

  • Page 8: Safety Symbols

    IMPORTANT SAFETY INSTRUCTIONS 100519 - 6250W OPEN FRAME INvERTER Safety Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 9: Operation Symbols

    IMPORTANT SAFETY INSTRUCTIONS 100519 - 6250W OPEN FRAME INvERTER Operation Symbols Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to more safely operate the product.

  • Page 10: Quick Start Label Symbols

    DANGER  This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for outside parties without the explicit consent of Champion Power Equipment. Press the engine switch to the “OFF” position.

  • Page 11: Controls And Features

    CONTROLS AND FEATURES 100519 - 6250W OPEN FRAME INvERTER CONTROLS AND FEATURES Read this operator’s manual before operating your generator. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Generator 1. Reversal Valve 8.

  • Page 12: Control Panel

    CONTROLS AND FEATURES 100519 - 6250W OPEN FRAME INvERTER Control Panel 1. Engine Switch – Used to put in START mode or STOP the RECEPTACLES generator. 12V DC, 8 Amp (Automotive) 2. Economy Mode Switch – Enables/disables automatic idle May be used to supply electrical power for control.

  • Page 13: Intelligauge

    CONTROLS AND FEATURES 100519 - 6250W OPEN FRAME INvERTER Intelligauge Four mode digital meter for displaying voltage, frequency (hertz), run time, and total run time. The LCD displays each mode by pressing the button below the display. MODE bUTTON MODE DESCRIPTION Output voltage of the generator.

  • Page 14: Fcc Statement

    CONTROLS AND FEATURES 100519 - 6250W OPEN FRAME INvERTER FCC Statement Parts Included 1. This device complies with Part 15 of the FCC Rules. Accessories Operation is subject to the following two conditions: Flexible Oil Funnel ..............1 1a. This device may not cause harmful interference.

  • Page 15: Assembly

    ASSEMbLY 100519 - 6250W OPEN FRAME INvERTER ASSEMbLY Install the Wheel Kit Your generator requires some assembly. This unit ships from CAUTION  our factory without oil. It must be properly serviced with fuel and oil before operation. The wheel kit is not intended for over-the-road use.

  • Page 16: Add Engine Oil

    ASSEMbLY 100519 - 6250W OPEN FRAME INvERTER Install the Handle 1. Place the generator on a flat, level surface. 1. Place the handle (F) over the mounting channel on the 2. Remove oil fill cap/dipstick to add oil. frame. 3. Using a funnel, add up to 37.2 fl. oz. (1.2 qt.) of oil 2.

  • Page 17: Add Fuel

    ASSEMbLY 100519 - 6250W OPEN FRAME INvERTER NOTICE  The first 5 hours of run time are the break-in period for the unit. During the break in period stay at or below 50% of the running watt rating and vary the load occasionally to allow stator windings to heat and cool.

  • Page 18: Grounding

    OPERATION 100519 - 6250W OPEN FRAME INvERTER – Electrical devices that require a grounded receptacle pin WARNING  connection will not function if the receptacle ground pin is not functional. Pouring gasoline too fast through the fuel screen may result...

  • Page 19: Surge Protection

    OPERATION 100519 - 6250W OPEN FRAME INvERTER 5. Pull the choke to the “CHOKE” position. WARNING  During operation the muffler and exhaust fumes will become hot. If adequate cooling and breathing space are not supplied, or if the generator is blocked or enclosed, temperatures can become extremely heated and may lead to fire.

  • Page 20: Connecting Electrical Loads

    OPERATION 100519 - 6250W OPEN FRAME INvERTER NOTICE WARNING   For gasoline restarts with hot engine in hot ambient Connecting a generator to your electric utility company’s temperature > 86°F (30°C), keep the choke in “CHOKE” power lines or to another power source may be against position for only 1 pull of the recoil starter.

  • Page 21: Gfci

    OPERATION 100519 - 6250W OPEN FRAME INvERTER 5. Plug in and turn on the next item. 6. Allow the engine to stabilize. 7. Repeat steps 5-6 for each additional item. NOTICE  Never exceed the specified capacity when adding loads to the generator.

  • Page 22: Stopping The Engine

    OPERATION 100519 - 6250W OPEN FRAME INvERTER Battery Charging 3. Press the engine switch to the “OFF” position. 1. Before connecting the battery charging cable (included) to a battery that is installed in a vehicle, disconnect the vehicle battery ground cable from the negative (–) battery terminal.

  • Page 23: Moving The Generator

    MAINTENANCE 100519 - 6250W OPEN FRAME INvERTER – NEVER tilt sideways while moving the generator. The part number and recommended minimum altitude for the application of the high altitude carburetor main jet is listed in – Failure to follow these instructions could result in personal the following table.

  • Page 24: Changing The Engine Oil

    MAINTENANCE 100519 - 6250W OPEN FRAME INvERTER Changing the Engine Oil 3. Inspect the electrode on the plug. It must be clean and not worn to produce the spark required for ignition. Change oil when the engine is warm. Refer to the oil 4.

  • Page 25: Cleaning The Spark Arrestor

    MAINTENANCE 100519 - 6250W OPEN FRAME INvERTER Cleaning the Spark Arrestor Technical Support Team at 1-877-338-0999 for all other service and/or adjustment needs. 1. Allow the engine to cool completely before servicing the spark arrestor. Maintenance Schedule 2. Remove the two or three screws (varies by model) holding...

  • Page 26: Storage

    STORAGE 100519 - 6250W OPEN FRAME INvERTER STORAGE DANGER  Gasoline vapors are highly flammable and extremely explosive. Fire or explosion can cause severe burns or death. Only fill or drain fuel outdoors in a well-ventilated area. DO NOT pump gasoline directly into the generator. Use an approved container to transfer the fuel to the generator.

  • Page 27: Removing From Storage

    STORAGE 100519 - 6250W OPEN FRAME INvERTER Removing from Storage If the generator has been improperly stored for a long period of time with gasoline in the gasoline tank and/or carburetor, all fuel must be drained and the carburetor must be thoroughly cleaned.

  • Page 28: Specifications

    SPECIFICATIONS 100519 - 6250W OPEN FRAME INvERTER SPECIFICATIONS Oil Specifications DO NOT OVERFILL. Generator Specifications Type ..........*See chart below Generator Model ........

  • Page 29: Troubleshooting

    TROUbLESHOOTING 100519 - 6250W OPEN FRAME INvERTER TROUbLESHOOTING Problem Cause Solution No fuel. Add fuel. Faulty spark plug. Clean and adjust spark plug or replace. Fill crankcase to the proper level. Low oil level. Place generator on a flat, level surface.
  • Page 30 Consequential Damage workmanship for a period of three years (parts and labor) from Champion Power Equipment disclaims any obligation to cover the original date of purchase and 270 days (parts and labor) for any loss of time, use of this product, freight, or any incidental commercial and industrial use.
  • Page 31 THE UNITED STATES ENVIRONMENTAL PROTECTION AGENCY (U.S. EPA) AND THE CALIFORNIA AIR RESOURCES BOARD (CARB) EMISSION CONTROL SYSTEM WARRANTY Your Champion Power Equipment (CPE) engine complies with both the U.S. EPA and state of California Air Resources Board (CARB) emissions regulations.
  • Page 32 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1995 and later model year California small off-road engines (SORE) (for other states, 1997 and later model year engines). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
  • Page 33 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.

Table of Contents