Standard Labor Guidelines - Delfield 6125XL-S Service, Installation And Care Manual

6000XL Series Service and Installation Manual
STANDARD LABOR gUIDELINES TO REPAIR OR REPLACE PARTS ON DELFIELD EqUIPMENT
Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special coverage.
• A maximum of 1-hour is allowed to diagnose a defective component.
• A maximum of 1-hour is allowed for retrieval of parts not in stock.
• A maximum travel distance of 100 miles round trip and 2-hours will be reimbursed.
• Overtime, installation/start-up, normal control adjustments, general maintenance, glass breakage, freight damage, and/or
correcting and end-user installation error will not be reimbursed under warranty unless pre-approved with a Service Work
Authorization from Delfield. You must submit the number with the service claim.
LABOR OF 1-HOUR IS ALLOWED TO REPLACE:
• Thermostat
• Evaporator/Condenser Fan Motor and Blade
• Hi-limit/Thermal Protector Switch
• Compressor Start Components and Overload Protector
• Condensate Element
LABOR OF 2 HOURS TO REPLACE:
• Defrost Element
• Locate/Repair Leak
LABOR OF 3 HOURS TO REPLACE:
• Condenser or Evaporator Coil
• Expansion Valve
LABOR OF 4 HOURS TO REPLACE
• Compressor
This includes recovery of refrigerant and leak check.
$35.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings,
solder, brazing rod, nitrogen, or similar fees.)
REFRIgERANTS
• R404A A maximum of $15.00/lb. or ??¢/oz. will be reimbursed.
16
For customer service, call (800) 733-8829, (800) 733-8821, Fax (888) 779-2040, www.delfield.com
• Door Jamb Switch
• Solenoid Coil
• Fan Delay/Defrost Termination Switch
• Door Hinges, Locks, and Gaskets
• Thermometer
• Solenoid Valve
Delfield
™
®