Standard Labor Guidelines To Repair Parts; On Delfield Equipment - Delfield Versa Drawer 18600VD Installation And Operation Manual

Versa Drawer™ Refrigeration Units
STANDARD LABOR GUIDELINES TO REPAIR OR REPLACE PARTS ON
DELFIELD EQUIPMENT UNDER WARRANTY
Advice and recommendations given by Delfield
Service Technicians do not constitute or guarantee any
special coverage.
A maximum of 1-hour is allowed to diagnose a
defective component.
A maximum of 1-hour is allowed for retrieval of parts
not in stock.
LABOR OF 1 HOUR IS ALLOWED TO REPLACE:
• Solenoid Coil
• Hi-limit/Thermal Protector Switch
• Compressor Start Components and Overload
Protector
LABOR OF 2 HOURS TO REPLACE:
• Drawer Tracks/Cartridges
• Pressure Control
• Microprocessor Control
LABOR OF 3 HOURS TO REPLACE:
• Expansion Valve
LABOR OF 4 HOURS TO REPLACE:
Compressor
This includes recovery of refrigerant and leak check.
$55.00 (USD) maximum reimbursement for refrigerant
recovery (includes recovery machine, pump, torch,
oil, flux, minor fittings, solder, brazing rod, nitrogen, or
similar fees.)
Delfield · 980 S. Isabella Road, Mt. Pleasant, MI 48858 · (989) 773-7981 or (800) 733-8829 · Fax (989) 773-3210
16
A maximum travel distance of 100 miles round trip and
2-hours will be reimbursed.
Overtime, installation/start-up, normal control
adjustments, general maintenance, glass breakage,
freight damage, and/or correcting and end-user
installation error will not be reimbursed under warranty
unless pre-approved with a Service Work Authorization
from Delfield. You must submit the number with the
service claim.
• Evaporator/Condenser Fan Motor and Blade
• Door Hinges, Locks, and Gaskets
• Solenoid Valve
• Locate/Repair Leak
• Condenser or Evaporator Coil
Refrigerants
R404A A maximum of $16.00/lb.(0.43kg) (USD).