Table of Contents
Advertisement
Fault
Coloured coatings (blue, yel-
low, brown) that are difficult
or impossible to remove are
present inside the appliance
or on stainless steel table-
ware.
Coloured deposits (yellow,
orange, brown) that are easy
to remove are present inside
the appliance (mainly at the
bottom).
Plastic parts inside the appli-
ance are discoloured.
Plastic parts are discol-
oured.
Removable streaks are
present on glasses, glass-
ware with a metallic appear-
ance and cutlery.
Cause
The formation of films is due
to substances contained in
vegetables (cabbage, celery,
potatoes, noodles, etc.) or
tap water (manganese).
The formation of films is due
to metal components on sil-
ver or aluminium tableware.
The formation of films is due
to ingredients of food rem-
nants and tap water (limes-
cale) "soaplike".
Plastic parts inside the appli-
ance may become discol-
oured during the life of the
dishwasher.
Washing temperature is too
low.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Amount of rinse aid to be
dispensed is set too high.
No rinse aid has been ad-
ded.
Troubleshooting en
troubleshooting
Clean the appliance.
▶
You can remove deposits with
"Mechanical cleaning" → Page 43
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.
Clean the appliance.
▶
You can remove deposits with
"Mechanical cleaning" → Page 43
or a machine cleaning product. It
may not always be possible to com-
pletely remove deposits but they
are harmless to health.
Check the setting of the water
1.
softening system.
Add special salt.
2.
→ "Adding special salt", Page 27
If you are using combined deter-
3.
gents (tabs), activate the water
softening system.
Follow the information about deter-
gents.
→ "Information on detergents",
Page 31
Discolouration can come about and
▶
will not impair functioning of the ap-
pliance.
Select a programme with a higher
▶
washing temperature.
→ "Programmes", Page 20
Only remove large remnants of food
▶
and do not prerinse tableware.
Adjust the sensitivity of the sensors.
▶
→ "Sensors", Page 13
Set the rinse aid system to a lower
▶
setting.
→ "Adding rinse aid", Page 29
▶
55
Advertisement
Table of Contents
