Related Manuals for Siemens SN87Y800BE
Summary of Contents for Siemens SN87Y800BE
- Page 1 Dishwasher SN87Y800BE User manual Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Features......... 22 General information...... 4 Top basket ........ 22 Intended use........ 4 Bottom basket ........ 23 Restriction on user group.... 4 Cutlery basket ........ 24 Safe installation ........ 4 Etagere ........... 24 Safe use ........... 6 Folding prongs ....... 24 Damaged appliance ...... 8 Knife shelf........ 25 Risk to children ........ 8 glassZone........ 25... - Page 3 Setting a programme ..... 36 Protect appliance from frost... 62 Setting additional functions .... 36 Transporting the appliance .... 62 Setting timer programming .... 36 Disposing of old appliance .... 62 Starting the programme .... 36 Customer Service...... 62 Interrupting programme .... 36 Product number (E-Nr.), produc- Terminate programme.... 37 tion number (FD) and consecut- Display programme information.. 37...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side. - Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
-
Page 8: Damaged Appliance
en Safety Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. -
Page 9: Safety Systems
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. -
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish ▶ Environmental protection and saving energy Environmental protection on the appliance, do not use sponges with a rough surface or and saving energy abrasive cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Aquasensor
en Environmental protection and saving energy During the drying phase moisture Sensor setting Description from the interior of the dishwasher is Standard Optimum setting for a stored in the mineral and heat energy mixed load and heavily is released. The heat energy is blown soiled tableware. -
Page 13: Installation And Connection
Installation and connection en Check the Scope of supply and Installation and connection Installation and connec- the condition of the appliance. tion Consult the installation instructions for the installation dimensions re- Installation and connection quired. Scope of supply Make the appliance level using the height-adjustable feet. -
Page 14: Drinking Water Connection
en Installation and connection The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡... -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 63. -
Page 16: Controls
en Familiarising yourself with your appliance "Detergent" → Page 31 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 27 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 17 Familiarising yourself with your appliance en 4 5 6 7 8 9 "Switching on the appliance" → Page 35 ON/OFF button and reset button "Switching off the appliance" → Page 37 "Terminating the programme" → Page 37 "Programmes" → Page 19 Programme buttons Info button If you press , the display shows information about selected programmes, basic settings and additional functions.
- Page 18 en Familiarising yourself with your appliance buttons You can use these buttons to scroll between the basic settings. → "Changing basic settings", Page 40 "Changing basic settings" → Page 40 Setting buttons "Opening the appliance door" → Page 35 Door opener Display The display shows information about pro- grammes, basic settings or additional functions.
-
Page 19: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... -
Page 20: Information For Test Institutes
en Programmes Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 21 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 35 °C household food remnants ¡... -
Page 21: Favourite
Additional functions en E-mail enquiries to: dishwasher@test- Additional functions Additional functions appliances.com The product number (E-Nr.) and the You can find an overview of the addi- Additional functions production number (FD) are required tional functions that can be selected here. They can be found on the rat- here. -
Page 22: Features
en Features Top basket Additional func- tion Arrange cups and glasses in the top ¡ Switch on with mixed basket. loads containing table- IntensiveZone ware with different soil- ing levels, e.g. place very soiled pots and pans in the bottom bas- ket and normally soiled tableware in the upper basket. -
Page 23: Bottom Basket
Features en Press in the levers on the right and Bottom basket left on the outside of the basket. Arrange pans and plates in the bot- tom basket. The basket can then slip down slightly. Raise or lower the basket evenly to Cutlery basket the right level. -
Page 24: Cutlery Basket
en Features Cutlery basket Folding prongs Arrange cutlery in the cutlery basket, Use the folding prongs to position always without sorting it and with the tableware securely, e.g. plates. sharp points downwards. You can fold the prongs down to po- sition pans, bowls and glasses Etagere better. -
Page 25: Knife Shelf
Features en Set the slider to ON or OFF. Knife shelf Use the shelf for knives and long items of cutlery. Push in the top basket. Cleaning glassZone Limescale and soiling from the dish- glassZone washing water can block the nozzles. Note: Always operate the appliance Use the glassZone in the top basket with the glassZone fitted. -
Page 26: Basket Heights
en Before using for the first time Place the glassZone in the top Push in the top basket. basket and lock in position . Check that the mounts are in the correct position. a The glassZone audibly clicks into position ... -
Page 27: Water Softening System
Water softening system en Note: If you select Initial start-up To remove any marks from water Home Connect here, make further or other residues, we recommend settings using the Home Connect you operate the appliance without app on your mobile device. tableware before using it for the You can change the settings for first time. -
Page 28: Setting The Water Softening System
en Water softening system ¡ Special salt for dishwashers can Setting the water softening damage the tub due to corrosion. system To make sure that any special ▶ salt that escapes is washed out Set the water hardness on your appli- of the tub, add the special salt ance. -
Page 29: Switching Off The Water Softening System
Water softening system en Switching off the water Regeneration of the water softening system softening system If you find the special salt refill indic- In order to obtain fault-free function of ator irritating, e.g. when using com- the water softening system, the appli- bined detergents with salt replace- ance performs regeneration of the ment substances, you can switch the... -
Page 30: Rinse Aid System
en Rinse aid system Spilled rinse aid can cause ex- Rinse aid system Rinse aid system cessive frothing during the wash cycle. You can use the rinse aid system Rinse aid system Close the lid of the dispenser for and rinse aid to get tableware and rinse aid. -
Page 31: Detergent
Detergent en Press repeatedly until the display Detergent Description shows "Rinse aid dispenser". Powder deter- Powder detergent is re- Press repeatedly until the gent commended for shorter display shows 0. "Programmes" → Page 19. To save the settings, press The dosage can be adjus- approx. -
Page 32: Unsuitable Detergents
en Detergent pletely dispense with certain sub- Combined detergent stances. The cleaning effect may Besides conventional separate deter- be restricted here. gents, a number of products are ¡ Set the rinse aid and the water available with additional functions. softening system to the separate These products contain not only de- detergent or combined detergent tergent but also rinse aid and salt re-... -
Page 33: Tableware
Tableware en Add the detergent to the dry deter- Close the lid of the detergent dis- gent dispenser. penser. 50 ml 25 ml 15 ml a The lid clicks into position. If you are using tablets, one is a The detergent dispenser will open enough. -
Page 34: Damage To Glass And Tableware
en Tableware Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 35: Removing Tableware
Basic operation en To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 36: Setting A Programme
en Basic operation cient programme for the combina- 3h 25min) or "Finish at" (e.g. tion of energy/water consumption 15:20 hours). You can change this for this type of tableware and evid- setting in the "Basic settings" ences conformity with the EU Eco- → Page 38. design Directive. -
Page 37: Terminate Programme
Basic operation en Press to resume the pro- gramme. Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Press for approx. ▶ 4 seconds. a All displays light up. a As soon as the displays are off, the display shows "Programme was terminated."... -
Page 38: Basic Settings
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time. - Page 39 Basic settings en Basic setting Selection Description Eco forecast Switch EcoCheck on or off. When selecting the programme, the average wa- ter consumption and energy consumption is briefly shown on the display. emotionLight Switch the interior lighting of the appliance on or On via main switch off.
-
Page 40: Changing Basic Settings
en Home Connect Basic setting Selection Description autoOpen Dry Activate or deactivate automatic opening of the On in all programmes appliance door during the drying phase. On with Eco 50° If the function has been activated, the running time may increase. → "autoOpen Dry", Page 12 Wi-Fi Switch the wireless network connection on or off. -
Page 41: Home Connect Quick Start
Home Connect en To be able to use Home Connect, Connecting the appliance to WLAN you must first set up the connection home network (Wi-Fi) to the WLAN home network (Wi-Fi Requirements and to the Home Connect app. ¡ Home Connect app is installed on ¡... -
Page 42: Remote Diagnostics
en Home Connect Activating Remote Start Data protection When you have selected "Manual" in Please see the information on data the basic settings of this function, ac- protection. tivate the function on your appliance. The first time your appliance is Requirements registered on a home network ¡... -
Page 43: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.siemens-home.bsh- mend cleaning your appliance at reg- group.com/store or from customer ular intervals. service. -
Page 44: Filter System
en Cleaning and servicing To ensure optimum cleaning perform- Clean the filters. ance, the programme doses the de- Place the machine care product in tergents independently of each an- the appliance interior. other during the relevant cleaning Only use machine care products phase. -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Turn the coarse filter anticlockwise Carefully clean the rim of dirt and remove the filter system . between the coarse and the fine fil- ter. Check that no foreign objects ‒ Re-assemble the filter system. fall into the sump. Make sure that the locking catches on the coarse filter click into posi- tion. - Page 46 en Cleaning and servicing Check the outlet nozzles on the spray arms for blockages under running water and remove any for- eign bodies. Insert the lower spray arm. a The spray arm clicks into position. Insert the upper spray arm and screw it firmly in place.
-
Page 47: Troubleshooting
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 48 en Troubleshooting Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
-
Page 49: Error Code / Fault Display / Signal
Troubleshooting en Error code / Fault display / Signal Fault Cause Troubleshooting E:2130 lights up. Intake opening of Zeolith Re-arrange the tableware in the ap- ▶ container is covered by pliance so the "Intake opening of the Zeolith container " → Page 15 items of tableware. - Page 50 en Troubleshooting Fault Cause Troubleshooting E:3200 or indicator for wa- Clean the filter. ter supply lights up. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks. Restore the power supply. Switch the appliance on. E:9240 lights up.
-
Page 51: Washing Results
Troubleshooting en Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:0100 to E:9010 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 52 en Troubleshooting Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Activate "Extra Dry" → Page 38. Extra Dry not activated to im- ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 53 Troubleshooting en Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 44 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 44 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
- Page 54 en Troubleshooting Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 19 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 55 Troubleshooting en Fault Cause Troubleshooting Tea residue or lipstick marks Washing temperature is too Select a programme with a higher ▶ on tableware. low. washing temperature. → "Programmes", Page 19 Too little detergent is being Use a suitable "Detergent " ▶ → Page 31 and follow the manufac- used or is unsuitable.
- Page 56 en Troubleshooting Fault Cause Troubleshooting Plastic parts are discol- Washing temperature is too Select a programme with a higher ▶ oured. low. washing temperature. → "Programmes", Page 19 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
-
Page 57: Home Connect Problem
Troubleshooting en Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 58: Information On Display Panel
en Troubleshooting Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 28. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 59: Mechanical Damage
Troubleshooting en Fault Cause Troubleshooting → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 37 Appliance stops during the Appliance door is not closed Close the appliance door. ▶ programme or cuts out. properly. Power and/or water supply Check the power supply. - Page 60 en Troubleshooting Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
-
Page 61: Clean Wastewater Pump
Transportation, storage and disposal en Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 62: Protect Appliance From Frost
en Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 63: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
Technical specifications en least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. -
Page 64: Information Regarding Free And Open Source Software
en Technical specifications ternatively, you can also find the Power consumption Off mode/standby model identifier in the first line of the mode: 0.50 W EU energy label. Left-on mode: 0.50 W Networked standby: Information regarding Free 2.00 W Time in left-on mode: and Open Source Software 0 min This product includes software com- Time after which ap-... - Page 65 2014/53/EU. 2.4 GHz band: 100 mW max. A detailed RED Declaration of Con- 5 GHz band: 100 mW max. formity can be found online at www.siemens-home.bsh-group.com among the additional documents on the product page for your appliance. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 68 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001567555* 9001567555 (010527) 650 P5...