Table of Contents
Advertisement
en Troubleshooting
Fault
E:32-00 will light up altern-
ately or indicator for water
supply lights up.
E:92-40 will light up altern-
ately.
E:61-03 will light up altern-
ately. Water is not drained.
E:61-02 will light up altern-
ately.
E:90-01 will light up altern-
ately.
A different error code ap-
pears in the display window.
E:01-00 to E:90-10
50
Cause
Filters are soiled or blocked.
Wastewater hose is blocked
or kinked.
Siphon connection is still
sealed.
Cover of the wastewater
pump is loose.
Wastewater pump is
blocked.
Cover of the wastewater
pump is loose
Mains voltage is too low.
A technical fault is present.
troubleshooting
Check the water connection for
9.
leaks.
Restore the power supply.
10.
Switch the appliance on.
11.
Clean the filters.
▶
→ "Cleaning filters", Page 45
Reposition the wastewater hose
1.
without kinks.
Remove residues.
2.
Check the connection to the siphon
▶
and open if necessary.
Secure the cover of the "Wastewa-
▶
ter pump " → Page 60 so it clicks
into position.
Clean the wastewater pump.
▶
→ "Clean wastewater pump",
Page 60
Secure the cover of the "Wastewa-
▶
ter pump " → Page 60 so it clicks
into position.
This is not a fault on the appliance.
Contact an electrician.
1.
Have the mains voltage and elec-
2.
trical installation checked by an
electrician.
Press .
1.
Unplug the appliance or switch off
2.
the fuse.
Wait at least 2 minutes.
3.
Insert the mains plug of the appli-
4.
ance in a socket or switch on the
fuse.
Switch the appliance on.
5.
If the problem occurs again:
6.
Press .
‒
Turn off the water tap.
‒
Pull out the mains plug.
‒
Contact "Customer Service"
‒
→ Page 61 and give the er-
ror code.
Advertisement
Table of Contents
