Table of Contents
Advertisement
The Eco 50° programme is an es-
pecially environmentally friendly
programme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
Setting a programme
To adjust the wash cycle to the soil-
ing level of the tableware, select a
suitable programme.
Press the right programme button.
▶
→ "Programmes", Page 20
a The programme is set and the pro-
gramme button flashes.
a The remaining running time of the
programme appears on the dis-
play.
Setting additional functions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
→ "Programmes", Page 20
Press the button for the relevant
▶
additional function.
→ "Additional functions", Page 22
a The additional function is set and
the additional function button
flashes.
Setting timer programming
Press
or
1.
a "00h:01m" appears on the display.
.
Use
or
2.
quired start time for the pro-
gramme.
Press
.
3.
a This activates time preselection.
Tip: To deactivate timer program-
ming, press
until "00h:00m" appears in the dis-
play.
Starting the programme
Press
.
▶
a The programme has ended when
the display shows "00h:00m".
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 36
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Press
.
1.
a The programme is saved and the
appliance switches off.
Basic operation en
to set the re-
or
repeatedly
35
Advertisement
Table of Contents
