Rectangle trestle dining table base rectangle trestle dining table top w/2-22in leaves (2 pages)
Summary of Contents for Hooker Furniture 5/0 Venetian Upholstered Headboard 1586-90851-MIR Swirl
Page 1
ASSEMBLY INSTRUCTION ITEM# 1586-90851-MIR Swirl 5/0 Venetian Upholstered Headboard 1586-90852-MIR Swirl 5/0 Upholstered Footboard 1586-90867-MIR Swirl 6/0-6/6 Venetian Uph Headboard 1586-90868-MIR Swirl 6/0-6/6 Upholstered Footboard 1586-90853-MIR Swirl 5/0-6/6 Upholstered Rails 1586-90863-MIR Swirl 6/0 Upholstered Rails Caution: Please make sure you have all parts indicated below prior to assembly. This bed is heavy and can best be assembled with the help of two or more people.
Page 2
Please note the hardware bag to assemble side rails to HB&FB is in the box of side rails. Assembly steps: 1. Insert 2 bolts (H) into holes of each side post on Headboard (A) and Footboard (B), attach the ends of side rails (C) to bolts (H) on posts by using 2 curved washers (G) and 2 nuts (E), tighten nuts (E) securely with spanner wrench (F).
Page 3
Note: You can change the height of slats by adjusting the height of cleats on side rails as shown in diagram 4. Remove bolts (I), lock washers (O) and flat washers (J) from the cleats by turning bolts (I) with allen wrench (M) in anti-clockwise direction. Adjust the cleats to a disired position, and then secure lock washers, flat washers, bolts in clockwise direction by turning with allen wrench.
Need help?
Do you have a question about the 5/0 Venetian Upholstered Headboard 1586-90851-MIR Swirl and is the answer not in the manual?
Questions and answers