Grandstream Networks GXP-2140 User Manual page 6

Hide thumbs Also See for GXP-2140:
Table of Contents

Advertisement

Enter a name for the extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: john.smith@bicomsystems.com.
Click on the Save button.
Registering phone
This chapter describes how to register Grandstream phone using Hostname or IP Address, or
DNS SRV.
The following topics are covered:
Hostname or IP Address
Registering your device
Line configuration from devices web interface.
To access the web interface of your Grandstream phone, first you must know it's IP address on
your network.
To find the IP address of your device please:
Press the Home button.
Go to Status and press the Select button.
Go to Network status and press the Select button.
IP address is displayed under IPv4: e.g. 192.168.8.198
NOTE: Depending on your Grandstream device and its firmware, web interface settings may
vary.
Once you have entered the IP address a log in menu will pop up, the user name is: admin and
the password: admin.
After you log in, under Accounts tab you should select Account 1 -> General Settings.
Enter your Extension name into the Account Name field.
Enter your server address into the SIP Server field.
Enter extension Username into the Authenticate ID field.
Enter extension Secret into the Authenticate Password field.
Press Save and Apply button to preserve changes. Your phone should register after couple of
seconds, if not, please reboot your phone.
If everything is done as above described, you should have successfully registered your phone
to PBXware. Dial *123 to verify registration.

Advertisement

Table of Contents
loading

Table of Contents