Table of Contents
Advertisement
Battery Maintenance
9
Add Water To A Battery Without Single Point Watering System
1.
Unlock and remove the cap (1).
2.
Make sure that the battery acid (2) is level with or above the top of the plates (3).
3.
If the battery acid is level with or above the top of the plates:
3.A
Install and lock the cap.
3.B
Fully charge the batteries.
4.
If the battery acid is below the top of the plates:
4.A
Add water until the battery acid is level with the top of the plates.
4.B
Install and lock the cap.
4.C
Fully charge the batteries.
5.
Unlock and remove the cap.
6.
Make sure that the battery acid is 0.5 inches (13 mm) above the top of the plates. Add water as
necessary.
CAUTION
7.
Install and lock the cap.
Page 76
LOOSE BATTERY CAPS CAN CAUSE BATTERY ACID TO LEAK.
FULLY ATTACH THE BATTERY CAPS TO PREVENT LEAKAGE.
ONWARD HP 2-PASSENGER ELECTRIC
Operators Manual
TPCC01DT00EN020 (Edition A)
Advertisement
Table of Contents
