Page 1
’ peratOr s manual FLAIL MOWER/ VERTICUTTER City Ranger 2250...
Page 2
Reservations: As it is the Egholm policy to make continuous improvements, we reserve the right to alter the specifications and equipment at any time without notice. Egholm accepts no liability for errors or omissions in the operator’s manual.
10°. (Picture 3) It is recommended that counterweights are fitted to the rear to prevent the machine tipping forwards. Refer to the basic City Ranger 2250 Operator’s Manual. Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
The machine: Flail Mower/Verticutter 2250 22SLK Type: · has been manufactured in conformity with the provisions of the Machinery Directive, Directive 2006/42/EU Place: Lemvig Date: Signature: Knud Olsen, Senior Engineer Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Vertical blades: Used for vertical cutting which provides air to the root system of the lawn and removes moss. Counterweights: Fitted to the rear of the machine Top filter: Should be used in frequent mowing in dry periods. Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
5. Lock the flail mower in place with the locking handle on the A-frame. (Picture 3) The locking handle can only be engaged when the machine has been stopped. Removing: Follow the procedure for fitting in the reverse order. Attaching Locking Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Check the protective screens on the front and back edges of the mower guard regularly for cracks or wear. Checking blades Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
(Picture 1). The flail mower will now adjust to Weight distribution Joystick ground conditions. To adjust the weight distribution read the operator’s manual for the basic City Ranger 2250 machine. 4. Start the flail mower: Switch on with the front PTO switch. (Picture 2)
(Picture 2) In other words it is an advantage to use as few adjusting rings as possible to achieve the required cutting height. Adjusting rings R-cotter pin Fine adjustment handle Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Page 11
3. For vertical cutting, the R-cotter pin must be removed so that the mower is in floating position, as this ensures an even depth and results in an even and thorough treatment of the lawn. (Picture 1) Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Avoid high pressure cleaning of the snap couplings. Wipe snap couplings clean with a cloth. (Picture 2) Clean the couplings with a cloth Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
(Picture 4) Protective screens (avoid stones being thrown out): Check the screens on the front and rear edges of the mower guard for wear, and replace if necessary. Lubricate the castor wheel forks Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Page 14
The nut and bolt must not be tightened too much, otherwise the flails will not move. (Picture 3) Bolt for blade The flails are fitted together Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Page 15
When it is time to store the flail mower for the winter, the following steps are recommended: 1. Remove any loose paint and repaint any damaged areas. 2. Spray the flail mower with protective lubricant. Vertical blades fitted individually Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
The warranty period for the materials and manufacture of this flail mower is 12 months from the date of purchase. In case of errors or defects on the machine within the warranty period, Egholm will carry out the necessary repairs without charge for materials and working hours in accordance with the terms and conditions listed below.
2. Remove all plastic and rubber parts and dispose of. 3. After the parts mentioned have been removed, the machine is ready to be handed over to one of your local approved scrap merchants. Operator’s Manual City Ranger 2250 Flail Mower/verticutter...
Wearing parts 5.1 Wearing parts - City Ranger 2250 flail mower/verticutter 01100300 Wheel 09700290 Stone guard, back edge 90203061 Vertical blade set 09701270 Rubber wheel 01604020 Fan belt 90501681 Flails set 01700040 Bearing for rubber wheel 09701530 Spacer ring 09700280 Stone guard, front edge...
Need help?
Do you have a question about the City Ranger 2250 and is the answer not in the manual?
Questions and answers