Page 1
Operator´s manual Snow V-plough City Ranger 2260/2250...
Page 2
Reservations As it is the Egholm policy to make continuous improvements, we reserve the right to alter the specifications and equipment at any time without notice. Egholm accepts no liability for errors or omissions in the operator’s manual.
Daily cleaning and maintenance will extend machine. the lifetime of both the machine and the attachment. The V-plough support has sideways suspension, so that the snow V-plough always adjusts to ground conditions. Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Do not drive on slopes with an incline of more than 10°. (Picture 3) Max. 10° Do not drive on slopes with an incline of more than 10° Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Unless otherwise agreed in writing between the operator, customer and Egholm, Egholm is the data originator (data originator) of all data generated by the machine and attachments during use.
Weight on snow V-plough 118 kg Clearing width: 1,200 -1,400 mm Ground clearance below scraping edge, lifted 240 mm Ground clearance below skids, lifted 215 mm Attention Specifications may be changed without prior notice Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Disassembly Attaching Follow the procedure for fitting in reverse order. To make attachment and removal easier, set the left and right blades evenly. Locking Operator’s Manual City Ranger 2260/2250 Snow V-plough...
5. Turn the right blade snow V-plough by pressing the black joystick button and moving the joystick left or right. (Picture 4) When the joystick is moved to the right, the blade swings forwards. Black button Weight distribution Operator’s Manual City Ranger 2260/2250 Snow V-plough...
2. Lock the snow V-plough in the raised position using the transport lock. (Picture 2) 3. Stop the machine. Skid 4. Remove the locking ring on the skid. (Picture 3) Adjust the skid height by moving washers up or down. Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Page 13
There are five lubrication nipples in the centre swivel. There are four lubrication nipples on the Location of lubrication nipples cylinder. (Picture 3) Note After 10 hours of operation - check if bolts and nuts are tightened. Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Page 14
When the snow V-plough is to be stored outside the season, it is recommended to remove any loose paint and to repaint any damaged areas. It is recommended the attachment is greased / sprayed with protective lubricant. Operator’s Manual City Ranger 2260/2250 Snow V-plough...
The warranty period for the materials and manufacture of this snow V-plough is 12 months from the date of purchase. In case of errors or defects on the machine within the warranty period, Egholm will carry out the necessary repairs at no charge to the customer, including materials and working hours, in accordance with the terms and conditions listed below.
2. Remove the plastic and rubber parts and dispose of them in accordance with the applicable environmental legislation. 3. After the parts mentioned have been removed, the machine is ready to be handed over to an approved scrap merchant. Operator’s Manual City Ranger 2260/2250 Snow V-plough...
Need help?
Do you have a question about the City Ranger 2260 and is the answer not in the manual?
Questions and answers