Table of Contents
Advertisement
10. Optional:
Hang sprayer
on wall
Removing from storage:
1. Drain
2. Flush with
water
3. Disposal
Storage
Located on the underside of the tow bar is a mounting hole that can
be used to hang the sprayer on a wall. Note: Hook is not included,
hook is supplied by customer.
Wall
Hook
Drain the antifreeze left in the tank through the tank drain hole into a
suitable container.
Fill the tank with fresh water and run through the system. Operate the
spray gun until the system is completely flushed. Be sure to set up
containers to capture the antifreeze flush water.
DO NOT add bleach back into the sprayer before flushing the system
as bleach can react with antifreeze
Dispose of the antifreeze and flush water properly.
Mounting hole
50
Advertisement
Table of Contents
