Related Manuals for Federal Signal Corporation FireRay Scene Light
Summary of Contents for Federal Signal Corporation FireRay Scene Light
- Page 1 FireRay Scene Light ® Installation and Maintenance Instructions 25500386 A1 0320 Printed in U.S.A © Copyright 2016-2020 Federal Signal Corporation...
- Page 2 A copy of this limited warranty can also be obtained by written request to Federal Signal Corporation, 2645 Federal Signal Drive, University Park, IL 60484, email to info@fedsig.com or call +1 708-534-3400.
-
Page 3: Table Of Contents
Contents Safety Message to Installers and Service Personnel ..... 4 Safety Message to Operators ............5 Overview of the FireRay Scene Light ..........6 Unpacking the Product ..............6 Installing the FireRay ................ 6 Making Electrical Connections ............13 Getting Technical Support .............. 14 Getting Repair Service .............. -
Page 4: Safety Message To Installers And Service Personnel
Safety Message to Installers and Service Personnel Safety Message to Installers and Service Personnel People’s lives depend on your proper installation of our products. It is important to read, understand, and follow all instructions shipped with the products. Listed below are some other important safety instructions and precautions you should follow: •... -
Page 5: Safety Message To Operators
Safety Message to Operators Safety Message to Operators Peoples’ lives depend on your safe use of our products. Listed below are some important safety instructions and precautions you should follow: • Although your warning system is operating properly, it may not be completely effective. People may not see or heed your warning signal. -
Page 6: Overview Of The Fireray Scene Light
Installing the FireRay Overview of the FireRay Scene Light The FireRay Scene light is a self-contained, high intensity, LED light designed for mounting to the exterior of a vehicle. FireRay Scene Lights are designed for operation on 12 Vdc. Unpacking the Product After unpacking the light, inspect it for damage that may have occurred in transit. -
Page 7: Figure 1 Mounting Holes (Not To Scale)
Installing the FireRay Figure 1 Mounting Holes (Not to scale) 2. Using the dimensions provided in Figure 2, scribe the two mounting hole locations and a wiring routing hole location on the mounting surface. Installallation and Maintenance Instructions Federal Signal www.fedsig.com... - Page 8 Installing the FireRay DAMAGE TO LIGHT: When installing the FireRay scene light on a vehicle, you MUST use the manufacturer’s supplied mounting gasket, screws, and screw grommets. Do not use an impact drill or an electric screw gun when installing the light. Torque the mounting screws to the manufacturer’s recommended...
-
Page 9: Figure 2 Exploded View - No Bezel
Installing the FireRay Figure 2 Exploded View - No Bezel Installallation and Maintenance Instructions Federal Signal www.fedsig.com... -
Page 10: Figure 3 Exploded View - With Bezel
Installing the FireRay Figure 3 Exploded View - With Bezel FireRay Scene Light ® Federal Signal www.fedsig.com... -
Page 11: Figure 4 Fr6 Base
Installing the FireRay Figure 4 FR6 Base Installallation and Maintenance Instructions Federal Signal www.fedsig.com... -
Page 12: Figure 5 Fr7 And Fr9 Base
Installing the FireRay Figure 5 FR7 and FR9 Base FireRay Scene Light ® Federal Signal www.fedsig.com... -
Page 13: Making Electrical Connections
Making Electrical Connections Making Electrical Connections The FireRay Scene light assembly operates on 12 Vdc. Two 8.7-inch long lead wires are supplied for making electrical connections to the FireRay Scene light assembly. Ensure that all wires are properly connected and insulated appropriately. -
Page 14: Getting Technical Support
Getting Technical Support Getting Technical Support For technical support, please contact: Federal Signal Corporation Phone: 1-800-443-9132 Fax: 1-800-343-9706 Email: empserviceinfo@fedsig.com FireRay Scene Light ® Federal Signal www.fedsig.com... -
Page 15: Getting Repair Service
Authorization (RMA). Obtain an RMA from a Local Distributor or Manufacturer’s Representative. Provided a brief explanation of the service requested or the nature of the malfunction. Address all communications to the following address. Federal Signal Corporation Service Department 2645 Federal Signal Drive University Park IL 60484-3167 Installallation and Maintenance Instructions Federal Signal www.fedsig.com... - Page 16 2645 Federal Signal Drive University Park, Illinois 60484 www.fedsig.com Customer Support Police/Fire-EMS: 800-264-3578 • +1 708 534-3400 Work Truck: 800-824-0254 • +1 708 534-3400 Technical Support 800-433-9132 • +1 708 534-3400...
Need help?
Do you have a question about the FireRay Scene Light and is the answer not in the manual?
Questions and answers