Note About This Guide; Specifications - RadioMaster TX12 Instruction Manual

1.7. Note about this guide.

This guide covers basic information about your radio. OpenTX software is very
powerful and has a large number of programming and mixing functions. Please visit
the site below for a comprehensive software installation guide for more detailed
instructions https://www.open-tx.org

1.8. Specifications

Exterior size： 170*159*108mm
Weight： 363g（Excluding battery）
Frequency： 2.400GHZ-2.480GHZ
RF Module： Single chip multi-protocol（CC2500）
Supported protocols： Corona 、Hitec、Futaba S-FHSS、Frsky D16/D8、
RadioLink、Graupner HoTT and more*
Transmit power： Maximum 20dbm（Adjustable）
Antenna gain： 2db
Operational current： 160mA@8.4V
Operational voltage： 6.6-8.4v DC
Effective distance： > 2km @ 22dbm
Open sourced firmware： OpenTX（Transmitter） DIY-Multiprotocol-TX-
Module（RF module）
Channels：Maximum 12 (Receiver dependent)
Display： 128*64 Monochrome LCD
Gimbal： Potentiometer/ Hall-effect (Depending on version purchased)
Upgrade method: Supports USB online / SD card offline upgrade
For a complete list of protocols, visit:
*
https://github.com/pascallanger/DIY-Multiprotocol-TX-
Module/blob/master/Protocols_Details.md
7