Logic Switches - RadioMaster TX12 Instruction Manual

Mirror：Mirror the curve vertically.
Clear：Clear the current curve.
4.4.8. Logic switches（Logical Switches）
The logic switch is a user-programmed virtual switch. Like the physical switch,
the logic switch is also a switch, but unlike a physical switch, which can be moved by
hand, the logic switch is an internal switch triggered by certain user-programmed
conditions. The judgment condition you set allows the radio control to automatically
turn on or off the logic switch to achieve a certain or a series of automated actions.
The setting of the L01 example in the figure is expressed as follows: When the
return value V1 is less than 11.0V, the L01 switch is automatically turned on. In the
settings of other pages, L01 has the same function as the physical switch. You can
define the corresponding function for L01 on or off. In this way, a switch is
automatically executed according to the parameters that change in real time.
The radio-control system provides 64 logic switches, each of which has three
judgment methods:
1. Compare the values of parameters a and b, a corresponds to V1, b
corresponds to V2, a and b can be any source, such as input source, channel, switch,
or return item, etc.
2. Compare the value of parameter a and data x, a corresponds to v1, x
corresponds to v2, and x is a fixed value, which is used to compare with parameter a
3. Parameter a can be compared with its own calculation result. For example,
the change of parameter a itself can affect the current state of the logic switch.
Functions
Triggered when the parameter v1 is equal to the data v2. For
a=x
example, if the thr gimbal is less than -90, the current logic switch
41