Reset, Statistics And About; System Settings - RadioMaster Zorro Instruction Manual

Model name, TX voltage, gimbal/switch position and trim location. Scroll to show the channel
position, values and channel monitor.

3.1.1. Reset, Statistics and About

Press and hold the ENT key to show the Reset, Statistics and
About information. The Reset menu allows for the reset of flight data, timers and telemetry
information.

3.2. System settings

Long press the left SYS button to enter the system setting page. The system setting page is
divided into 7 sections.
- TOOLS ： Tool page, which includes the setting function of the spectrum analyzer and some
third-party equipment, such as the setting function of TBS Crossfire, Frsky specific receiver
settings, and Graupner's receiver HoTT protocol settings.
- SD CARD：SD card page. In this page, you can view the contents of the SD card, and quickly set
the startup screen, model pictures, and the function of flashing the built-in /external module
firmware from firmware files loaded on to the SD Card.
- RADIO SETUP ： The radio-control setup page, this page is the basic functions of the radio
control and the settings in the default parameters of the radio control
- GLOBAL FUNCTIONS：This page can customize various global functions. Global functions are
similar to special functions in model parameters, but global functions are shared by all model,
while functions in model parameters are only used by the current model.