Table of Contents
Advertisement
2.2. Using Companion software to upgrade radio controller
firmware
After the above settings are completed, click the firmware download button to
download the firmware.
Note: The RadioMaster TX12 radio control is pre-installed with stable and
reliable OpenTX firmware when it leaves the factory. If there is no special need,
please do not update the firmware unnecessarily. Incorrectly flashing firmware may
leave your radio inoperable. Only proceed with updates if you are confident in your
understanding and ability to do so.
If you are required to update the firmware to for functional upgrades, please
carefully follow the instructions below. Before updating the firmware, make sure
that all steps are correct and operate carefully to ensure that your radio control is
successfully updated.
If not required, please skip this section.
Before writing the firmware, please make sure that the radio control is turned
off, and plug in the supplied USB-C (TYPE-C) cable. The following device name will
appear in the computer device manager:
12
Hide quick links:
Advertisement
Table of Contents
