Using Your Induction Hob; To Start Cooking - Candy CIS633DTT Instruction Manual

The base diameter of induction cookware
Cooking zone
1,2(180mm)
3 (280mm)
The above may vary according to the quality of the pan used.

Using your Induction Hob

To start cooking

1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
" – " or " – – ", indicating that the induction hob has entered
the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
3.Select one heating zone and set a power level by touching the "-" or "+"
control.
a. If you don't set the power within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
b. You can modify the heat setting at any time during cooking.
If the display flashes
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
Minimum (mm)
120
180
EN-11
alternately with the heat