Oregon 720-120 Original Instruction Manual page 18

4 Installation
3 Start by placing the base piece on the floor.
Place the front piece on top of the base
piece by aligning the holes they have on the
front right and left corners. Bolt the front
piece to the base through the two holes
using the provided wrench.
G
4 Next, attach the two side pieces to each
other with provided bolts through the holes
at the intersection of two pieces to create
the side support piece.
J
G
18
585124ab_Auto Chain Grinder_OM_720-120.indd 18
5 To complete the assembly of the stand, bolt
the side support first to the base and then to
the front piece.
G
720-120
3/1/17 3:05 PM