Installation; 1 Safety During Installation; 2 Site Requirements; 3 Unpacking The Machine - Oregon 720-120 Original Instruction Manual

4 Installation

4 Installation

4 1 Safety during installation

WARNING Before you install, operate, or perform maintenance on the machine, you must read the
safety information in this manual. Obey the instructions in this manual to prevent injuries or damage to the
equipment.
WARNING Always wear safety gloves, protective glasses, and any other personal protective
equipment suitable for your task.

4 2 Site requirements

WARNING Put the machine in a dry area indoors with good lighting. Do not let the machine become
wet or damp. Do not put the machine near gas, liquids, or other flammable materials.
CAUTION Make sure that the floor where the machine is placed is flat and level. Attach the stand to
the floor with screws.
Note: Machines can be set up on a bench or you can use the included stand. Please note that mounting
hardware for the bench is not supplied with the machine.

4 3 Unpacking the machine

Note: For a video demonstration of how to unpack, assemble, install, and operate the machine, visit
OregonProducts.com.
1 Unpack the crates.
Note: Keep the delivery crates and packing materials. Pack the machine in them if it is moved or sent
for service. The crates and packing materials will minimize the risk of damage during transportation.
2 Make sure that all parts in the list below are included in the delivery:
• Oregon 720-120 Auto Chain Grinder machine
• stand (with set of screws, nuts, and bolts for assembly)
• pneumatic tensioner
• converter (with 2 screws for assembly)
• Oregon 720-120 Auto Chain Grinder User manual (this document)
• rectangular profile stone (55 x 15 x 15 mm) and profile template
• hex key, which is used to change the top-plate angle
• Allen wrench, which is used for tightening
• grinding wheel guard (with 2 screws for assembly)
• 2 types of ceramic grinding wheels
• screws, nuts, and bolts for assembly
Note: For your convenience, you may also use your own tools to assist the machine's assembly.
3 Remove all packing materials. Remove the metal plate from the chain vise, which is used to protect the
grinding head during transport. Remove the air hose connector's packing material.
16
585124ab_Auto Chain Grinder_OM_720-120.indd 16
720-120
3/1/17 3:05 PM