Datamax H-4212X Operator's Manual page 60

Printer Options (continued)
Menu Item
REWINDER
MODE
DISABLED
AUTO
ENABLED
REWINDER ADJUSTMENT
00 (-30 – 15 %)
50
Controls the Powered Internal Rewinder option, where:
Sets the detection method and response of the printer,
where:
Disables the option.
Enables the rewinder only when a Peel and Present
option is installed; however, no error will be generated
when the Peel and Present option is not attached.
(Upon power-up, the rewinder will turn slowly to
tension the material.)
Enables the rewinder and generates an error if it
cannot be detected. Upon power-up, the rewinder will
turn slowly (for about 30 seconds) to tension the
material and then whenever labels move.
Adjusts the amount of rewinding tension to minimize
TOF registration drift (sometimes evident when using
narrow media), where:
Decreases or increases the nominal torque by the
percentage selected.
Details
H-Class