Huawei UPS5000-E-200K-SM Quick Manual page 14

Initial Startup
5.2
•
If the UPS is powered on for the first time, you need to obtain the startup password from the
Service Expert app. Skip this step if the UPS is not powered on for the first time.
•
The Service Expert app can be downloaded from Google Play Store and can run on Android.
1. Obtain the startup password.
Download and install the Service Expert app.
On the app home screen, tap StartUp to access the Set Startup screen.
Insert the WiFi module into the USB port on the
MDU. Enable the mobile phone WLAN, search
for the UPS_WIFI signal, and connect to the
WiFi signal. The password is Changeme.
Set the Site and Device Type as required, and
connect the device. Set IP to 192.168.0.10, Port
to 443, Username to admin, Password to
Changeme, and click Login.
After login, tap Power-on password activation
on the screen. A message is displayed,
indicating whether to start the UPS. Tap OK.
2. Set the language, time, date, network parameters, and system parameters on the Settings
Wizard screen.
Use the app to
start the UPS
online?
Yes
14
No, start the
UPS offline
Set Site and Device Type as required,
and tap Offline Activation.
Enter Bar code and Verification code
obtained from the LCD on the Offline
Activation screen. Tap Generate PWD to
generate a startup password.
Enter the generated password in the
password textbox on the LCD to start the
UPS.