Gorenje MRP 330 EA Instruction Manuals page 21

Fitting the beaters

Switch the appliance off.

Insert the stem of beater into one of the mounting holes in the motor unit.

Push and turn the beater until in locks into place.

Repeat for the other beater.
Fitting the dough kneaders

Switch the appliance off.

Insert the stem of left dough kneader ( with big and grey plastic ) into big mounting holes in the
motor unit.

Push and turn the left dough kneader until in locks into place.

Insert the stem of right dough kneader ( with small and white plastic ) into small mounting holes in
the motor unit.

Push and turn the right dough kneader until in locks into place.
Fitting the blending attachment

Switch the appliance off.

Pull up the bolt cover. ( Picture 1)

Screw the blending attachment into the housing by turning counter clockwise. ( Picture 2 )

Switch the appliance.
Removing the beaters or dough hooks

Switch the appliance off.

Keep the release button depressed.

Pull the beaters or dough hooks out of the motor unit.
Removing the blender attachment
 Switch the appliance off.
 Unscrew the blender attachment by turning clockwise.
USE

To switch on, slide the speed control switch to one of the positions 1 (lowest speed) to 4 (highest
speed).It is recommended to start at a low speed, then change to a higher speed if necessary.

To switch off, slide the switch to position 0.

Use turbo ( pulse ) button for maximum speed directly.
Picture 2
20
Picture 1