(Optional) Magnetic Stripe Reader; Battery Disposal; Replacing The Battery - Infinite Peripherals DPP–350 User Manual

2-inch mobile printer

Hide thumbs Also See for DPP–350:

Table of Contents

DPP-350 User Manual

(Optional) Magnetic Stripe Reader

The built-in magnetic card reader incorporates a 3-track magnetic read head requiring a single swipe to capture field data from all three

tracks. The magnetic card reader is in the front of the printer.

Before using the magnetic strip reader, you must install the software to read and process the card data. Contact your Infinite

Peripherals or refer to

https://developer.ipcmobile.com/

To read a magnetic stripe card, place the card with the stripe facing backwards.

To ensure the stripe passes over the read head Evenly.

Keep the bottom edge of the card flat on the inner base of the reader.

Swipe the card evenly from start to finish, with the speed of the swipe consistent to accurately read the data on the card.

(Face this direction)

Magnetic Strip

Card Swipe Direction

Magnetic Card Reader

Table of Contents

Do you have a question about the DPP–350 and is the answer not in the manual?