Replace The Battery; Status And Operational Modes - Infinite Peripherals DPP–350 User Manual

DPP-350 User Manual

Replace the Battery

1. Open the battery compartment cover on the bottom of
the printer by rotating the two locking levers.
2. Remove the battery cover.
3. Lift the battery upwards from the compartment carefully.
4. Pull the battery connector wires to detach the battery
connector gently.
5. Replace the cover.

Status and Operational Modes

The LEDs on the printer indicate the modes of operations.
LEDs illuminate information about the connection status,
charging and/or low battery status.
The statuses and descriptions are
LED Color Description
Battery charging, or
Red
Solid Paper is out or at the end
Battery charging complete
Green
Solid Power is on
Low battery
Green
Flashes 1 per sec
flash Printer head is overheating
Red
flash
Green
Note
Dispose of used batteries in accordance with Federal law.
This may include disposing them at a recycling center or
hazardous waste collection site.
11