Advertisement
Section 1
Install Headrest Covers
Step 1
Step 1
Remove the headrest from the driver's
seat by pushing in on the release buttons
supporting the headrest shafts and
lifting up on the headrest.
Repeat this procedure for the passenger
side seat.
P3 - 29280 - Rev. D 1115
Use the headrest
covers labeled to
match your vehicle's
2
1
headrest material.
Installation Instructions - Seat Covers, Front Kit
Step 2
Step 2
Select the correct headrest covers from the 4
headrest covers that come in the installation
kit. Use the headrest covers labeled to match
your vehicle's headrest material.
Wrap the headrest covers over the headrests,
making sure that the crossed elastic edging
and internal label are at the back of each
headrest. Adjust the seams for a smoother
appearance.
Set headrests aside - do not reinstall at this
time.
Page 3
© 2015 Bestop, Inc.
Advertisement
