Advertisement
Quick Links
Installation Tips
Read and follow, precisely, all installation instructions provided when
installing this product. Failure to do so may result in a poor fit, and could
place occupants of the vehicle in a potentially dangerous situation.
WARNING
To reduce the risk of accidental injury: Follow all vehicle Manufacturer's and
Bestop® safety messages, application and installation instructions.
• Do not remove seats from the vehicle to install this product.
• Fit and maintain sides of seat cover as tight to seat as possible, always
matching front to side seam of seat with similar panels and seams of seat cover.
• Remove headrest carefully to avoid damaging manufacturer's wiring.
Assure all plugs are connected after installation of seat cover.
• Do not use and replace if seat cover becomes damaged or wear no longer
allows a tight fit to seat sides.
Care & Maintenance
Your seat covers are machine washable. Wash separately in COLD water with
¼ of normal amount of soap. Hang dry.
-OR-
CAUTION
P1 - 29291 Rev. A 0119
Installation Instructions
Seat Covers, Rear Kit
Tools
Safety
Glasses
Safety glasses should be worn at all
times when installing this product.
Installation Instructions - Seat Covers, Rear Kit
Jeep® Wrangler Unlimited 4-Door 2018-current
WEAR SEAT BELTS AT ALL TIMES
Installation Time
1 hour
Skill Level
2 - Moderately Difficult
Vehicle Application:
Part Number 29291
Support
We're here to help! Go to:
https://www.bestop.com
and click on Need Help?
https://www.bestop.com/video-library
© 2019 Bestop, Inc.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bestop 29291
Summary of Contents for Bestop 29291
-
Page 1: Installation Instructions
WARNING To reduce the risk of accidental injury: Follow all vehicle Manufacturer’s and Bestop® safety messages, application and installation instructions. • Do not remove seats from the vehicle to install this product. • Fit and maintain sides of seat cover as tight to seat as possible, always matching front to side seam of seat with similar panels and seams of seat cover. -
Page 2: Parts List
Pages 7 to 9 of Guide Center Armrest Console Cover; Headrest Covers Center Armrest Console Cover Qty. 1 Headrest Covers Qty. 2 - Large Qty. 1 - Small Installation Instructions - Seat Covers, Rear Kit P2 - 29291 Rev. A 0119 © 2019 Bestop, Inc. - Page 3 1 Squeeze the headrest release buttons on the headrest supports. Release one post and then the other. 2 Lift the headrest to remove it from the headrest supports. Installation Instructions - Seat Covers, Rear Kit P3 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 4 3 Tilt the seatback about halfway forward to allow the cover to slip completely over the seatback. Unzip both seat covers before installing. Installation Instructions - Seat Covers, Rear Kit P4 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 5 Hook-&-Loop strip, behind the seatback comes out below the console. fabric just below the console. Firmly attach the Hook-&-Loop strip to the inside of the seatback fabric. Installation Instructions - Seat Covers, Rear Kit P5 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 6 Seatback Cover. Snug the fit by pulling down on the Seatback Cover while lifting up on the flaps and pushing the hook-&-loop strips firmly together. Installation Instructions - Seat Covers, Rear Kit P6 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 7 Tuck the flap underneath the Armrest Cover. Attach the Hook-&-Loop strip to the inside of the console cover fabric. Flip the Center Armrest Console back up. Installation Instructions - Seat Covers, Rear Kit P7 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 8 Seat Cover to the carpet. 4 Feed the flap between the seatback and seat bottom, and attach the Hook-&-Loop fabric to the carpet. Installation Instructions - Seat Covers, Rear Kit P8 -29291 Rev. A 0119 © 2019 Bestop, Inc.
- Page 9 Wrap the cover over the armrest console. center headrest. Adjust all seams for a smoother appearance. Installation Instructions - Seat Covers, Rear Kit P9 -29291 Rev. A 0119 © 2019 Bestop, Inc.
Need help?
Do you have a question about the 29291 and is the answer not in the manual?
Questions and answers