Table of Contents
Advertisement
Figure 4 Removing a blank panel (2)
3.
Unpack the power module.
4.
Correctly orient the power module.
If you install the power module in a left power module slot, make
sure the latch is above the handle. If you install the power
module in a right power module slot, make sure the latch is
below the handle.
5.
Holding the handle of the power module with one hand and
supporting the bottom of the power module with the other, slide
the power module along the guide rails into the slot until you
hear a click.
The power module is foolproof. If the power module is oriented
incorrectly, you cannot install the power module into the slot. If
you encounter a hard resistance while inserting the power
module, pull out the power module, reorient it, and then insert it
again.
7
Advertisement
Table of Contents
