Optional Accessories - FAAC 565 Manual

ENGLISH
When installation has been completed, check the efficiency
of the automated system and safety devices, and then
apply the "danger" warning sticker (fig.35) on the panel of
the up-and-over door to make it easy to see.
Apply the sticker, which indicates the release device of the
automated system (fig.35).

11. OPTIONAL ACCESSORIES

• If you are using the card for the CN60-E Sensitive Edge, a
compartment is provided for it inside the operator housing in the
position shown in figure 36.
• Floating batteries installation procedure: fit them on the opera-
tor with the appropriate bracket, and secure them with screw
and nut in the position shown in figure 37.
ATTENTION! If replacing batteries, cut out electrical power
before attempting any operation.
• Two external release systems can be fitted:
- with handle (fig.38 ref.A)
- with wrench (fig.38 ref.B)
• Counterbalanced doors can be automated by using the accessory shown in fig. 39 (GDA 3000).
B
Fig.36
A
Fig.38
Fig.35
24
ENGLISH
LOCK
Fig.37
Fig.39