19) Do not in any way modify the components of the automated system. 6) FAAC declines all liability caused by improper use or use other than that for which the automated system was intended. 20) The installer shall supply all information concerning manual operation of...
Page 3
IMPORTANT: arrange for the system to be earthed according to obtained via a rotating telescopic arm, is silent, smooth and fast. current legal regulations. The FAAC 560 automated system consists of a an hydraulic power unit, an electronic control unit and installation accessories. Figure Fig. 2 1 shows the operator's overall dimensions.
Page 4
(at least 20 cm) in the less advantageous position Keep the control and power cables separated. (closing). We recommend installing a pair of FAAC Fotoswitch photocells (fit Grease the telescope and front pin. them internally, in line with the door jamb) and/or a pneumatic Remove the breather screw (6.3) from the top of the operator.
Page 6
Les descriptions et les illustrations du présent manuel sont fournies à titre indicatif. FAAC se réserve le droit d’apporter à tout moment les modifications qu’elle jugera utiles sur ce produit tout en conservant les caractéristiques essentielles, sans devoir pour autant mettre à...
Need help?
Do you have a question about the 560 Series and is the answer not in the manual?
Questions and answers