Safety Precautions; Maintenance; Warranty - Jøtul Terrazza Installation Instructions Manual

NB: These Installation and Operating Instructions should be
kept for the entire service life of the product.
Follow the installation instructions as illustrated in Figure 1-11.
• Do not over-tighten the screws.

Safety precautions

The process of installing the product must be in compliance with
all local ordinances, including those that refer to national and
European standards. The fi replace must always be installed in
compliance with national laws and regulations.
Position
• There must be a minimum distance of 1.5 m from the sides
of the fi replace to any combustible surfaces and materials.
• The fi replace must be placed on a non-combustible surface,
such as bricks, concrete, rock or stone.
• The fi replace must not be placed inside confi ned spaces,
tents, camper vans, caravans, boats or indoors.
• The fi replace must not be placed beneath a roof overhang
or low branches on trees.
• The fi replace should be placed on a fl at, solid, stable surface.
It might also be a good idea to check with neighbours about
the position of the fi replace to ensure that smoke and smells
do not cause a nuisance.
Using the fi replace
• Never leave the fi replace unattended when it is lit. We
recommend you have a bucket of water close by.
• The fi replace should ONLY be used with dry, untreated logs/
charcoal.
• Warning! Never use petrol, paraffi n, methylated spirit or
similar liquids to light the fi re. You could injure yourself
and damage the product.
Firestarters to get the fi re going. Any other material may
damage the fi replace and shorten its service life.
• The fi re bowl provided must be used. The fi replace must not
be fi lled with too much wood. Doing so causes it to become
hotter than it is designed for.
• Never move or touch the fi replace when it is lit. After use, let
it cool for some time before touching it.
• Make sure at all times that children and animals do not get
too close to the fi replace.
• Let the logs burn out and the fi replace cool down.
• Remove the remains of logs or charcoal, as logs can
spontaneously ignite after use. Clean the fi replace with a
rag/cloth.
Weather conditions:
Keep a careful eye on the fi replace in windy weather. The
fl ames could burn in an uncontrolled way. If conditions are not
ideal, we recommend waiting for the weather to improve before
lighting the fi replace.
After using the fi replace
We recommend storing the fi replace somewhere dry when not
being used.
We recommend using Jøtul

Maintenance

The fi replace is made of 2 mm Corten steel, which develops
a "rough" rusted surface after a short time. This rusty layer
protects the metal fi replace from the elements, which means it
can be left outdoors all year round. Corten steel is also used on
building façades to achieve a rusted look.
NB: Rust can run down onto the surface and cause stains
that are diffi cult to remove. The surface should therefore be
covered to protect it.
NB: The fi replace must not be surface treated.
Technical data:
Height: 118 cm
Width: 50 cm
Depth: 50 cm
Weight: 30 kg

Warranty

2 years from the date of purchase.
NB: The heat may cause the fi replace to marginally change
shape (straight surfaces may become slightly rounded). This is
a natural occurrence when the fi replace is used and does not
constitute a reason for any claim for compensation.
Optional equipment:
item. no. 51012326 - Kit for Grill
Item. no. 51012325 - fi rescreen
ENGLISH
15