Cleaning And Maintenance; Resolving Failures Yourself - inventum vriezer RB010 Instruction Manual

6

cleaning and maintenance

The freezer section of this appliance is free from frost - no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm.
Use this opportunity to clean the appliance.
DEFROSTING AND CLEANING THE FREEZER
• Remove the plug from the socket.
• Open the door and remove the products. Store the products on a cool location, packed in newspapers and blankets.
• Leave the door open, this will accelerate the defrosting process.
• Place a receptacle under the freezer section and wait for the ice to defrost. You can also place a dish with hot water
(not boiling) in the freezer section.
Remove loose ice using a plastic scraper. Warning Never remove ice with sharp objects, defrosting sprays, hair dryers,
heaters or anything similar. This could lead to unsafe situations and cause irreparable damage to the appliance.
• Clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or soda in order
to prevent nasty smells. Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry.
• Leave the appliance to dry for 1 to 2 hours. The drawers can be removed from the appliance easily and washed by hand.
These components may never be cleaned in the dishwasher.
• Clean the outside of the appliance and the door rubbers with a soft damp cloth.
• Insert the plug in the socket.
INSTRUCTIONS
• A large amount of ice on the freezer surfaces disrupts the operation of the appliance and increases the energy consumption.
• Defrost the appliance at least once or twice per year. When too much ice is formed, you must defrost the appliance more often.
• Place the frozen products in a large tray, wrapped in newspapers and a blanket and store them on a cool location.
• Defrosting the freezer should be done as quickly as possible. Storing the products at room temperature for a time period
that is too long reduces their shelf life.
7

resolving failures yourself

Breakdown
Appliance does not do anything;
led does not light up
Temperature in the freezer
is too high or too low
Appliance makes noise
Remark: bubbling and expansion noises in the cooling circuit are normal.
24
• English
Cause
Plug not in socket
Incorrect thermostat setting
Ventilation openings are blocked
Is the appliance properly installed?
Does the rear of the freezer make
contact with something?
Solution
Insert the plug in the socket.
Set the thermostat to the correct setting
Clean the ventilation openings
Check the installation
Check this and move the freezer forward