Cleaning & Maintenance - inventum VR1720W Instruction Manual

6 0 stars
7 Cooling
8 Fresh food
9 Wine
Caution: store different types of food according to the instructions on the compartments or the recommended storage
temperature of the products you bought.
- If the freezer remains empty for a longer period of time, switch it off, defrost, clean and dry it and leave the door open to
prevent the formation of mould in the appliance.
6
Cleaning and maintenance
Before cleaning the appliance, switch it off by removing the plug from the socket.
Remove the food from the freezer. Clean the inside of the freezer. Use warm soapy water with a neutral cleaning agent to prevent
nasty smells. Wipe the inside of the freezer after cleaning with clean water and properly wipe everything dry. Leave the appliance
to dry for 1 to 2 hours. The shelves and drawers can be removed from the freezer easily and washed by hand. These components
may never be cleaned in the dishwasher.
For areas in the freezer that are difficult to clean, such as small openings or corners, it is recommended wiping them clean
regularly with a soft cloth or brush. If necessary, a tool can be used, such as thin sticks (cocktail sticks, for example), to make sure
no contamination can occur in these areas.
Clean the outside of the freezer and the door rubbers with a soft damp cloth.
Clean the back of the freezer and the surface on which it stands at least once a year with a vacuum cleaner, so that the ventilation
holes remain clean and the freezer is able to function as well and energy efficient as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, oil, etc.), boiling
water, acid or alkaline product to clean the freezer, as this could damage the surface or interior of the freezer. Boiling water and
benzene could deform or damage plastic components.
Defrosting
The freezer section of this appliance is free from frost - no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove all
products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets. Remove
the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section.
Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section. Do not use sharp
metal objects to scrape the freezer section clean, use a plastic ice scraper.
Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting. Place the frozen
products back in the freezer section once it has reached the required temperature.
Warning: Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar.
This could lead to unsafe situations and cause irreparable damage to the appliance.
Replacing the LED lamp
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the LED lamp in the appliance
is broken, you are not able to replace it yourself. Contact the Inventum service department.
-6 ~ 0 Fresh pork, beef, fish, chicken, packaged processed food, etc.
(consumption on the same day recommended, preferably
within 3 days).Partly packaged processed food (not suitable for
freezing).
-2 ~ +3 Fresh/frozen pork, beef, chicken, fresh water products, etc.
(stored for 7 days below 0°C, above 0°C consumption on the
same day is recommended, preferably no more than 2 days).
Seafood (less than 0°C during 15 days, it is not recommended
storing this above 0°C).
0 ~ +4 Fresh pork, beef, fish, chicken, prepared processed food, etc.
(consumption on the same day recommended, preferably within
3 days).
+5 ~ +20 Red wine, white wine, sparkling wine, etc.
27
English •