Using The Appliance For The First Time; Use - inventum vriezer RB010 Instruction Manual

3

using the appliance for the first time

Before using the appliance for the first time, you should proceed as follows: carefully unpack the appliance and remove all
packaging material and any promotional stickers. Keep the packaging (protective film, plastic bags, polystyrene and cardboard)
out of the reach of children. After unpacking the appliance, check it for external damage that may have occurred during
transport. Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation.
A minimum space of 10 cm is required between the appliance and the surrounding walls. In this way the appliance is able
to release heat properly, cool well and function in an energy efficient way. You can use the adjustable feet to level the appliance.
Do not place the appliance near heat sources such as central heating or a stove. Do take note of the climate class of the appliance.
When placed in a room that is too cold, the freezer will not function properly.
After placing the appliance, leave it for at least 3 hours before inserting the plug in the socket.
First clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or soda.
Wipe the inside of the appliance after cleaning with clean water and properly wipe everything dry. Leave the appliance to dry
for 1 to 2 hours.
CONNECTING TO THE ELECTRICITY GRID
Check that the voltage corresponds with what is stated on the information plate and insert the plug in the socket.
4

use

The control unit of the appliance is located on the inside.
Check that the voltage corresponds with what is stated on the information plate and insert the plug in the socket.
Operating panel
Thermostat Knob for controlling the temperature
Key for switching off the alarm
Alarm Indicator light for when the temperature in the appliance is too high
Power Indicator light for connection to the power supply
Super Indicator light for active Super Freeze mode
Super Freeze Key for switching Super Freeze mode on/off
Set the temperature with the thermostat knob and select a position between COLD and COLDER.
The COLD position provides the highest temperature and is the warmest position. The COLDEST position provides the lowest
temperature and is the coldest position.
We recommend setting the appliance to the MID position.
The appliance will now cool continuously until the set temperature has been reached. Allow the appliance to reach the required
temperature with no food. Usually this will take 2 to 3 hours. After that, you can set the thermostat knob to the required position
and fill the appliance with food.
SUPER FREEZE
Use this mode to quickly freeze food that is not yet frozen. In order to be able to freeze fresh food quickly, the temperature
of the freezer section should be lowered timely in advance. It may be necessary to activate the SUPER FREEZE mode
12 hours in advance.
When this mode is selected, the temperature of the freezer section automatically drops to the lowest position for a maximum
period of 24 hours. After 24 hours the temperature of the freezer section returns to the preset temperature.
In order to switch on the SUPER FREEZE mode, press the accompanying key until the SUPER indicator light starts to burn.
In order to switch off the Super Freeze mode, press the accompanying key once more, until the super indicator light goes out.
21
English •