Appliance Description; Using The Appliance For The First Time - inventum IVR0821D User Manual

2

appliance description

1. Freezer drawers
2. Thermostat
3
before the first use
Leave the appliance to stand for at least 3 hours before you insert the plug into the socket. Otherwise, you may damage the
compressor.
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and remove all the
packaging material. Keep the material (plastic, polystyrene and cardboard) out of reach of children. Check the appliance
after unpacking for any damage, possible from transportation. Place the appliance on a flat and stable surface.
The installation procedure is given in the Installation Instructions.
Clean the appliance thoroughly, especially in the interior, before use (see Cleaning & Maintenance).
The installation and electrical connection must be carried out by a qualified technician, in accordance with installation
instructions and local regulations.
The appliance must be connected with a properly installed fused socket. The power supply (AC) and voltage at the
operating point must correspond with the details on the rating label of the appliance. The rating label is located on the inside
left of the appliance.
There can be an odor when you first switch on the appliance. It will disappear after the appliance starts to cool.
First clean the interior of the appliance. Use warm water and a neutral detergent. After cleaning, rinse the interior with clean
water and rub dry. Leave the appliance to dry for 1 to 2 hours.
To ensure well functioning of your appliance make sure the adjustable front legs are adjusted so your appliance is level and
stable. You can adjust the legs by turning them clockwise (or in the opposite direction). This should be done before placing
food in the appliance.
1
2
21
English •